Panamax Totally Explained

Everything about Post-panamax totally explained

Ships classified as "Panamax" are of the maximum dimensions that will fit through the locks of the Panama Canal. This size is determined by the dimensions of the lock chambers, and the depth of the water in the canal. Panamax is a significant factor in the design of cargo ships, with many ships being built to exactly the maximum allowable size.

Dimensions

Panamax is determined principally by the dimensions of the canal's lock chambers, each of which is 33.53 metres (110 ft) wide by 320.0 metres (1050 ft) long, and 25.9 metres (85 ft) deep. The usable length of each lock chamber is 304.8 metres (1000 ft). The available water depth in the lock chambers varies, but the shallowest depth is at the south sill of the Pedro Miguel Locks and is 12.55 metres (41.2 ft) at a Miraflores Lake level of 16.61 metres (54 feet 6 in). The height of the Bridge of the Americas at Balboa is the limiting factor on a vessel's overall height. The maximum dimensions allowed for a ship transiting the canal are:

Length: 294.1 metres (965 ft)

Beam (width): 32.3 metres (106 ft)

Draft: 12.0 metres (39.5 ft) in tropical fresh water (the salinity and temperature of water affect its density, and hence how deeply a ship will sit in the water)

Air draft: 57.91 metres (190 ft) measured from the waterline to the vessel's highest point A Panamax cargo ship would typically have a displacement of around 65,000 tons.

Exceptions

Vessels up to 62.5 metres (205 ft) in height may pass by prior approval, co-ordinated with low tide at the Bridge of the Americas.
   On an exceptional basis, vessels up to 32.61 metres (107 ft) in beam may be permitted to transit, subject to additional draft constraints.
   Vessels with structures extending beyond the maximum length and/or beam above the level of the lock walls may be permitted transit subject to inspection and approval.
   During an exceptionally dry season, when the water level in Lake Gatún is low, the maximum permitted draft may be reduced.
   The longest ship ever to transit was the San Juan Prospector, now Marcona Prospector, an ore-bulk-oil carrier that's 296.57 metres (973 ft) long, with a beam of 32.3 metres (106 ft). The widest ships to transit are the two North Carolina class battleships, and, which have beams of 33.025 metres (108 ft 3.875 inches).

Impact on shipping

Panamax continues to be a noteworthy factor in ship design, with an increasing number of ships being built precisely to the Panamax limit, in order to transport the maximum amount of cargo in a single vessel.
Much bulk merchandise, such as grain products, is moved primarily on Panamax (or sub-Panamax) ships.
The increasing prevalence of vessels of the maximum size is a problem for the canal. A Panamax ship is a tight fit that requires precise control of the vessel in the locks, possibly resulting in longer lock time, and requiring that these ships be transited in daylight. Because the largest ships can't pass safely within the Gaillard Cut, the canal effectively operates an alternating one-way system for these ships.

Post-Panamax Ships

Post-Panamax or over-Panamax are the terms used to describe ships larger than Panamax that don't fit in the current canal.
Many modern ships are far larger than canal limits and can't use the canal. This is the case for supertankers and the largest modern container ships. U.S. Navy supercarriers are also in the post-Panamax class; the Nimitz class aircraft carriers are 333 metres (1092 ft) long overall with a beam of 41 metres (134 ft), while the flight deck is 76.8 metres (252 ft) wide.

Expansion

As early as the 1930s, new locks were proposed for the Panama Canal to ease congestion and to allow larger ships to pass.
On October 22, 2006, the Panama Canal Authority (with the support of the Electoral Tribunal) held a referendum for Panamanian citizens to vote on the Panama Canal expansion project. The expansion was approved by a wide margin, with support from about 78% of the electorate. It is estimated that this expansion will be completed by 2014. The projected cost is $5.3 billion; this sum is expected to be recovered within 11 years.
After expansion, the Panama Canal is expected to be able to handle vessels up to in size; currently, it can only handle vessels up to about . A third set of locks - 427 meters (1,400 feet) long, 55 meters (180 feet) wide, with a draft of 18.3 meters (60 feet) - will supplement the two existing sets of locks.

Comparison of sizes

Class	Panamax	Panamax II
Length	1050 ft (320.04 m)	1400 ft (426.72 m)
Width	110 ft (33.53 m)	180 ft (54.86 m)
Draft	41 ft (12.50 m)	60 ft (18.29 m)
TEU	5000	12000

Further Information

Get more info on 'Post-panamax'.

External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:

<a href="http://panamax.totallyexplained.com">Panamax Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.